Products

Lambda Sensor Extension Loom (for NTK E1) 0.55m 

Lambda Sensor Extension Loom (for NTK E1) 0.55m 

High quality Fiberglass racing seat with built-in padded head restraint high profile side bolsters for increased lateral support upholstered in lig...

Fiberglass seat with black gel coated shell perforated shell to enhance seat and back breath-ability. High profile side bolsters; upholstered in li...

Penske Racing Shocks over flow rings are made with durable plastic material. Tight slip fit seals ensure that any excess oil will be captured by th...

This 12 V color CCD Bullet Camera with PAL output signal allows for a signal input into a color display for viewing live on-screen imagery. The cam...

Connecting to the PC's Serial Port use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM).   PCI cable - The PCI cable co...

This kit suits the MoTeC PDM16 and PDM16 Marine units.    Kit includes:  AS616-26SN - Autosport 26 socket plug kit contains the connector, (26) si...

PDM15/PDM30 Flying Lead Harness, unterminated, this is made with Tefzel Wire.

This kit suits the MoTeC PDM32 and PDM32 Marine units Kit includes: AS616-26SN - Autosport 26 socket plug kit contains the connector, (26) size ...

Penske Racing Shocks 5" Coil Over Kit for Dirt Modified. Hard Anodized for maximum protection Simple safety pin for retaining spring Acme Thread =...

Penske Racing Shocks offers a wide variety of o-rings, both buna or viton material. Check you manual or parts list for appropriate P# and quantity.

Penske Shocks covers are specifically made so you no longer have to worry about getting the cover caught between the spring and the body. Custom ma...

55MM/45MM PISTON BAND

The Variable Bleed Piston from Penske Racing Shocks offers the user more versatility than any other piston in our range. The piston can produce cur...

The digressive linear piston was one of the first digressive pistons designed by Penske Shocks. This piston has maximum flow with a digressive face...

This piston produces a true digressive compression and digressive rebound stack. See below thumbnail for specific valving information and curve pro...

The Enhanced Linear Flow piston allows the user to get maximum mechanical grip by being able to run minimum .030" bleed holes. Typically, that much...

HIGHFLOW LINEAR PISTON DESCRIPTION Each piston face has a dished surface, to preload the valve shims flat against the piston face. The HighFlow pis...

Each piston face has a dished surface, to preload the valve shims flat against the piston face. The standard dishing is 1° on both the compression ...

Velocity Dependent Piston LINEAR (VDPL) The Velocity Dependent Piston Linear has the unique ability to be valved as a digressive piston, with the a...

Pro Lambda Meter only General:  CAN communications up to 1 Mbit RS232 communication for configuration Analogue output providing differential volt...

Pro Lambda Meter Kit, LSU 4.0, 2.6 meter General: CAN communications up to 1 Mbit RS232 communication for configuration Analogue output providing...

Pro Lambda Meter Kit, LSU 4.0, 6 meter General: CAN communications up to 1 Mbit RS232 communication for configuration Analogue output providing d...