MOTEC

Connecting to the PC's Serial Port use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM).   PCI cable - The PCI cable co...

Data Logging 16 MB: Allows recording of all input data to a 16 MB internal logging memory.

Steering angle sensor kit, 10 turn

The STC (Serial to CAN) adaptor converts RS232 data to CAN and vice versa allowing multiple RS232 devices to be connected to a Data Logger via CAN....

The Club Shift Light Module (SLM-C) provides eight fixed color LED indicator lights in a compact array. The lights are arranged in a pre-defined sh...

Basic Specifications: Maximum continuous operating temperature is 850 °C Maximum temperature for short period is 930 °C (maximum 10 minutes) Mount...

This 12 V color CCD Bullet Camera with PAL output signal allows for a signal input into a color display for viewing live on-screen imagery. The cam...

MoTeC UTC - USB to CAN adapter (includes USB A cable)   Software Requirements for UTC Compatibility: M400, M600, M800, M880 - V2.30S or later M84...

*You will be emailed your license file after the order is processed and verified.

MoTeC's 4 Channel Ignition Module is a high current ignition coil driver for use with most inductive ignition coils. 

32GB Autosport USB data plug Professional level, military spec - built for maximum data integrity. Internal USB 3.0 memory stick. Mechanically lat...

This is an authentic Bosch Ignitor. Don't risk your vehicles engine by using one from eBay or Amazon! They are most likely counterfeit products.   ...

The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECUs. The IEX connects to a single ignition output...

The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECUs. The IEX connects to a single ignition output...

Unfortunately we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer to purchase ...

I/O Upgrade - This upgrade activates the L120 inputs and outputs. It allows the ability to: Wire sensors into the L120. Use 2 digital and 3 speed ...

This kit suits the MoTeC PDM16 and PDM16 Marine units.    Kit includes:  AS616-26SN - Autosport 26 socket plug kit contains the connector, (26) si...

The Traction Control Multiplexer (TCMux) is designed to increase the speed inputs into a MoTeC ECU. It takes four individual wheel speed signals an...

The KTC (K-Line to CAN) adaptor converts CAN data to ISO 9141 K-Line data with specific formats to facilitate communication between MoTeC ‘hundred ...

Unfortunately we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer to purchase ...

Memory 120 MB: Increases the internal logging memory to 120 MB (requires the Data Logging 16 MB upgrade).

MoTeC’s LTC NTK (Lambda to CAN) modules monitor, control and diagnose NTK Lambda sensors, transmitting readings on a CAN bus. When multiple LTC NTK...

Includes all 3 connector kits below that are required to wire up a MoTeC M190 ECU. MS AS616-26SN MS AS616-35SN MS AS616-35SA

The Shift Light Module (SLM) may be used for shift lights, warning lights or other indicators as programmed by the user. It provides eight multicol...