AiM GPS08 with CAN Connection

$299.99

The benefits are huge:

  • An average of less than one meter tolerance, which means absolute precision in determining vehicle position in curves and when the finish line is very close to another track segment
  • Satellite signal is locked very rapidly. A few seconds after switch-on, the GPS08 is ready to operate
  • No risk of missing the signal anymore, as – in case of ‘noise’ or interferences on one system – the other system will guarantee the signal continuity

Description

The GPS08 module from AiM further expands the track mapping abilities of the EVO3 data logger and MXL, MXL2/MXG/MXS, and MyChron4 dashes. In addition, the GPS08 allows lap timing (even split times) without the use of trackside beacons, storing data for up to 50 tracks with up to 5 splits per track. The GPS08 can also calculate and log speed, lateral and longitudinal g-forces, and of course vehicle position.

Simple to install: Just connect the CAN cable to your dash and mount the GPS antenna. This configuration contains all of the GPS electronics inside the antenna. This solves the RFI issue that the original GPS Module had, so cable routing is less critical. The GPS unit willl even automatically configure itself during start-up!

The GPS08 is compatible with AiM MXL, MXL2, MXG, and MXS auto dashes; MyChron4 kart dashes, and EVO3 data loggers. Choose a cable length to suit your installation: 1.3m (4 ft) is appropriate for most formula cars, karts, and bikes. 4m (13 ft) is long enough for sedans.

GPS08 samples ten times per second position, speed and lateral/in-line acceleration at any point of the track: all the data needed for a precise evaluation of vehicle and driver behavior, which is the necessary step to improve performance.
Thanks to GPS08, even the predictive lap time will be much more reliable: in any moment of your race, you will know your time gap vs. your best lap with absolute precision.